Views: 0 Author: TOPBOLT technical team Publish Time: 2026-11-16 Origin: Site
Standard design principle: The bolt shank should be the weak point of the assembly. If overload occurs, the bolt will break first for risk warning. If the nut has insufficient strength, the internal thread teeth will be sheared or crushed. The bolt still looks intact, which often leads to misjudgment of bolt material quality. Root causes:
Nut grade is lower than the matched bolt grade;
Thin nut adopted with insufficient engaged thread turns;
Out-of-tolerance thread or damaged thread profile, load concentrated on limited threads;
Nut material creep under sustained high temperature, common in A194 matching applications;
Improper thread lubrication causes local overload during tightening.
An 8.8 bolt cannot be paired with a class 4 nut randomly. A 10.9 bolt requires a matched high-grade nut. Many overseas buyers only check bolt specs and ignore nut grades, treating nuts as trivial accessories. Stripping failure occurs once load rises.
Thin nuts have less thread engagement and much lower load capacity. Thin nuts are designed for lock assembly, not as primary load-carrying nuts. Maintenance crews often replace standard heavy nuts with thin nuts. They may hold static load but strip quickly under vibration or pressure.
For high-temperature piping and pressure vessel flange connections, A194 nuts work with A193 studs. Two frequent errors from customers:
Replace A194 nuts with ordinary carbon steel nuts for high-temperature studs;
Mix A194 classes (A194 2H /7 /8). Each class has different temperature limits and strength retention at heat. Hyperlink anchor text position for A194 nuts must be paired with the corresponding A193 stud grade. Random cross-class replacement will lead to thread stripping and flange leakage under long-term high-temperature load.
Inspection Item | Description |
|---|---|
Bolt & Nut Grade | Match strength grades per relevant standards. Lower-grade nuts cannot pair with higher-grade bolts |
Nut Type | Standard heavy nuts for main load connections; thin nuts only for locking purposes |
Operating Temp & Pressure | Confirm A194 class for high-temperature flanges and verify temperature rating |
Thread Condition | Inspect with thread gauges to rule out damaged threads and out-of-tolerance issues |
Engagement Length | Ensure sufficient engaged thread turns to prevent concentrated load |
Assembly Torque | Tighten within specified torque range to avoid local thread overload |
Bolt shank fracture: Overload on bolt body
Nut thread stripped, bolt intact: Insufficient nut strength or wrong matching
Stripping on hot flange: Prioritize A194 material class and temperature suitability check
Q1: Can I only replace the nut after stripping? A1: Not recommended. The external thread of the bolt may have invisible damage during stripping. Full set replacement is safer.
Q2: Can A194-2H match all A193 B7 studs? A2: A194-2H is the standard match for A193 B7, but project temperature and pressure specifications still need review. Some high-temperature services require higher A194 classes.
Q3: When can thin nuts be used? A3: Thin nuts are usually used in double nut locking configuration as lock nuts, not for main load bearing.