- All
- Product Name
- Product Keyword
- Product Model
- Product Summary
- Product Description
- Multi Field Search
Bridge steel structures are subject to heavy traffic loads, thermal deformation, weathering corrosion and wind-induced fatigue. Connection fasteners for bridges require high strength, fatigue resistance and long-term corrosion protection. NINGBO TOPBOLT METALWORKS CO., LTD. supplies dedicated structural fasteners for highway steel bridges, pedestrian bridges, municipal viaducts, composite girders and bridge bearing systems, covering deck systems, main girder splices and pier anchoring zones.
Tension Control Bolts (TC Bolts)
Standards: ASTM F1852, GB/T 3632
The primary fastener for bridge steel structures. The splined twist-off tip shears off automatically to control pre-tension, ensuring consistent clamping torque without a torque wrench on site. Widely used in steel box girders, orthotropic decks and crossbeam splices. Grade 10.9 with hot-dip galvanizing meets outdoor bridge corrosion requirements.
Shear Studs (Weld Studs)
Standards: ISO 13918, GB/T 10433
Core connectors for steel-concrete composite bridges. Welded through ceramic ferrules onto steel girder flanges, then embedded in cast-in-place concrete deck slabs to make steel and concrete act compositely. One of the highest-volume fasteners used in composite bridge decks.
Bridge Anchor Bolts
Standards: ASTM F1554 (Grade 36 / 55 / 105)
Used to anchor steel girder bearings, expansion joints and rail posts onto piers and abutments. Typically supplied with bent hooks or bearing plates, in large diameters and custom lengths, double-nutted for vibration resistance. The critical connection between substructure and superstructure.
Hardened Structural Washers
Standards: ASTM F436, DIN 6916
Heat-treated washers specifically designed for high-strength structural bolt assemblies, far harder than standard flat washers. The larger contact area distributes heavy preload and prevents indentation on splice plates. Supplied as a matched component with every A325 / A490 bolt set.
Heavy Hex Structural Nuts
Standards: ASTM A563 Grade DH, ASME B18.2.2
Wider across-flats dimension than standard hex nuts, engineered specifically for A325 / A490 and TC bolts, providing a larger bearing surface and more reliable thread engagement. Bridge steel nodes always specify heavy hex structural nuts — standard thin hex nuts are not allowed as substitutes.
| Item | Details |
|---|---|
| Product Types | TC Bolts, Shear Studs / Weld Studs, Bridge Anchor Bolts, Hardened Structural Washers, Heavy Hex Structural Nuts |
| Materials | High-Strength Alloy Steel, Quenched & Tempered Carbon Steel, Stainless Steel |
| Surface Finishes | Hot-Dip Galvanizing, Dacromet, Zinc-Flake Coating (Geomet-type) |
| Standards | ASTM F1852 / F1554 / F436 / A563 / ISO 13918 / GB/T 10433 / GB/T 3632, ISO |
| Customization | Custom anchor bolt lengths and hook forms per drawing, matched bolt sets per project, MTC and third-party material certificates available |
Tension Control Bolts (TC Bolts)
Shear Studs / Weld Studs
Bridge Anchor Bolts
Hardened Structural Washers
Heavy Hex Structural Nuts
TOPBOLT supplies complete structural fastening solutions for bridge and steel infrastructure. Share your drawings, bolt grade, surface finish, applicable standards and project quantity with our team to get selections engineered for bridge service.
